Side Bending, the learning experience...

Thank goodness that mango is such a flexible wood. Spritz a little water on it, place in the side bender and in no time it just bends. It is also very easy to straighten out once bent. Ask me how I know this.....
Yes, I "got" to practice straightening one of my side pieces!
Here is my newly straightened side board.
I placed the bass-side piece in the bender upside-down. oooops. I caught it when I was lining up the grain on the tail end of the guitar, well trying to at least. Since the two side pieces are "bookmatched" the grain should match up on either side. It does now. This time I marked the wood and paid much attention. Going slow is sometimes hard for me. This is a good exercise.

I also finished up the 90 degree bend on the lower side where it joins the neck. I couldn't do it on the side bender so I made a bending pipe. This is one of those "old" ways to do it. I got an electric BBQ lighter and squished it in the vise so it would fit into a 2 inch galvanized pipe. Clamped the pipe into the vise and it's ready to go! I thought the electric option was better than the propane torch method given my ADD. I was amazed how easy it was. I had heard all sorts of horror-stories, but just wait till it gets hot, keep spritzing and GO SLOW. Piece of cake.

I'll get some better photos for next time. These don't make much sense without arrows and labels. Next time.


I also cut the scarf joint and glued my neck blank. The neck joint is 10 degrees, where as most other steel strings is 15. Strange. I'm not doing the traditional mortise/tennon neck joint. Since I'm part of a class they had everything set up for the scarf joint method. Which is what most people do now days.

I'm going with walnut for the neck, as is traditional to the Maccaferri guitars. Walnut is also one of those things I am allergic to (along with just about everything). I haven't noticed any itching or stuffiness (other than the usual spring time stuffy nose) or Anaphylactic shock that I get when I eat walnuts. That's a good thing. Then again, I have lots of benedryl just in case.....
I still have to trim down the sides to the right depth, rough out the head stock and laminate the heel block which I hope to get to this weekend.
I'm very excited. It's starting to look like a guitar, as opposed to just a bunch of pieces of wood.

Oh, I forgot: I still need to do the rosette, which is done (finally) and soundhole. Then glue down the braces.....